The Atacama is our commercial, industrial high-pressure pump line and is designed for the most sophisticated & high-volume misting and humidification applications. Named after what’s considered the driest region in the world, the Atacama high pressure pump is equally impressive and suited to extreme environments. The Atacama is offered in 5 gpm to 25 horse power models with maximum flow rates from 4.5 gpm to 22 gpm (17 to 83 lpm).
Ingenuity went into designing a product line suited to such high demand by remaining true to the concepts of maximum efficiency and engineered reliability. The Atacama VFD series incluedes an optional programmable logic controller (PLC) and variable frequency drive (VFD) adjusts the motor speed and output based on pressure or zoning, in essence, managing fog output to defined parameters and operating energy and water efficient.
| Models / Flow Rates Atacama PLC/VFD |
A5.0VFD | 60Hz .37 – 4.5 GPM / 1.4 – 17 LPM 50Hz .37 – 3.7 GPM / 1.4 – 14 LPM |
|---|---|---|
| A7.5VFD | 60Hz .47 – 6.6 GPM / 1.8 – 25 LPM 50Hz .47 – 5.5 GPM / 1.8 – 21 LPM |
|
| A10.0VFD | 60Hz .93 – 8.9 GPM / 3.5 – 34 LPM 50Hz .93 – 7.4 GPM / 3.5 – 28 LPM |
|
| A15.0VFD | 60 Hz .92 – 13.2 GPM / 3.5 – 50 LPM 50 Hz .92 – 11.0 GPM / 3.5 – 42 LPM |
|
| A20.0VFD | 60 Hz 1.2 – 17.4 GPM / 4.5 – 66 LPM 50 Hz 1.2 – 14.5 GPM / 4.5 – 55 LPM |
|
| A25.0VFD | 60 Hz 2.8 – 22.0 GPM / 10.6 – 83 LPM 50 Hz 2.8 – 18.3 GPM / 10.6 – 69 LPM |
|
| Pump Module: | A5.0VFD – A7.5VFD | Length 32” x Width 20” x Height 18” 823 mm x 508 mm x 457 mm |
| A10.0VFD – A20.0VFD | Length 44” x Width 24.5” x Height 18” 1118 mm x 622 mm x 457 mm |
|
| A25.0VFD | Length 50” x Width 30.2” x Height 22” 1270 mm x 767 mm x 559 mm |
|
| Pump Module Weight: | A5.0VFD 335 lb / 151.9 kg | A7.5VFD 375 lb / 170 kg |
| A10.0VFD | 515 lb / 233.6 kg | |
| A15.0VFD | 685 lb / 310.7 kg | |
| A20.0VFD | 725 lb / 328.8 kg | |
| A25.0VFD | 1015 lb / 460.4 kg | |
| Filtration Assembly: | A5.0VFD-A7.5VFD | Length 16” Width 21” Depth 8.5” 406 mm x 533 mm x 216 mm 18 lb / 8.1 kg |
| A10.0VFD – A20.0VFD | Length 26” Width 21” Depth 8.5” 660 mm x 533 mm x 216 mm 30 lb / 13.6 kg |
|
| A25.0VFD | Length 32” Width 20” Depth 10” 812 mm x 508 mm x 254 mm 42 lb / 19 kg |
|
| Water Supply Requirements: | A5.0VFD | 5 gpm, .75” NPT |
| A7.5VFD | 7 gpm, .75” NPT | |
| A10.0VFD | 9 gpm, 1” NPT | |
| A15.0VFD | 14 gpm, 1.5” NPT | |
| A20.0VFD | 18 gpm, 1.5” NPT | |
| A25.0VFD | 22 gpm, 2” NPT | |
| Control Panel: | A5.0VFD – A25.0VFD | Length 23.5” x Width 19.5” x Depth 8” 597 mm x 495 mm x 203 mm 53 lb / 24 kg NEMA 3R (Control Enclosure) |
| VFD: | A5.0VFD – A7.5VFD | 10”H x 8.96”W x 8”D 25.4cm x 22.7cm x 20.3cm 12 lb / 5.4 kg NEMA 4X (VFD Enclosure) |
| A10.0VFD | 10”H x 8.04”W x 8”D 25.4cm x 20.4cm x 20.3cm 11 lb / 4.9 kg |
|
| A15.0VFD – A20.0VFD | 12.5”H x 6.92”W x 8”D 31.8cm x 17.6cm x 20.5cm 13.5 lb / 6.2 kg |
|
| A25.0VFD | 14.5”H x 9.42”W x 8”D 36.8cm x 23.9cmx 20.3cm 22 lb / 9.9 kg |
|
| Supply Power: | VFD | 208*/230*/460V, 60 Hz, 3P *signifies custom order |
| 220*/380/440V, 50 Hz, 3P *signifies custom order |
||
| Control Panel | 115/230V, 50/60 Hz, 1P | |
| Motor: | A5.0VFD | 5 HP |
| A7.5VFD | 7.5 HP | |
| A10.0VFD | 10 HP | |
| A15.0VFD | 15 HP | |
| A20.0VFD | 20 HP | |
| A25.0VFD | 25 HP |
| Modes of Operation: | Hand/Off/Auto switch |
|---|---|
| Inputs: | 1 analog input 0-10 VDC for speed control in variable pressure applications |
| 3 relay contact closures (2 for constant pressure applications, four speed settings, 1 for start command) | |
| Outputs: | Run status |
| Fault status | |
| Service status | |
| Diagnostics and Protection: | Inlet and outlet glycerin filled gauges for accurate readings |
| Hour meter showing system usage | |
| Thermal overload reset protects the motor from overheating | |
| Pulsation dampener minimizes wear to down stream components | |
| Safety relief valve provides back-up over pressure protection | |
| Thermal relief valve protects the pump against premature seal failure by eliminating heat build-up | |
| Low inlet water pressure protection | |
| Low/high outlet pressure protection | |
| VFD fault indicator includes motor overload faults | |
| Discharge: | 1200 psi / 83 bar max standard* *1500+ psi available (motor requirements & dimensions may change) |
| Drain: | Pressure release drain |
The Atacama A5.0VFD-DD pump is a perfect bridge between our lower-flow commercial, industrial pumps and our line of Atacama belt-driven pumps. Delivering a variable flow of .5 – 5 gpm, the A5.0VFD-DD can support larger fog applications but in an easy to maintain direct drive format.
The A5.0VFD-DD is a variable frequency drive unit and will operate in constant pressure or variable pressure applications. It operates multiple zones independently without running the chance of damaging pump head seals due to excessive bypass. Additionally, with several input options the Atacama allows for remote control from facilities management systems to weather stations or theatrical show controls.
| Flow rates: | A5.0VFD-DD 5 GPM |
|---|---|
| Pump Module Dimensions: | 36” x 18” x 16” 91.4 cm x 45.7 cm x 40.6 cm |
| Pump Module Weight: | 175 lbs / 79 kg |
| Control Panel Dimensions: | 18” x 16” x 10.25” 45.7 cm x 40.6 cm x 26 cm |
| Control Panel Weight: | 54 lbs / 25 kg |
| Control Enclosure: | NEMA enclosure |
| Water Filtration Assembly Dimensions: | 16” x 21” x 8.5” 40.6 cm x 52.2 cm x 21.6 cm |
| Water Filtration Assembly Weight | 18 lbs / 8 kg |
| Water Supply Requirements | Inlet size: 3/4” NPT Inlet pressure range: 20 to 75 PSI Min flow rate 5.0 GPM |
| Supply Power: | 208-230/460V, 3P, 60Hz Terminal connection |
| Motor: | TEFC 5HP, FLA 14-13.2/6.6 |
| Inputs: | 1 analog input 0-10 VDC for speed control in variable pressure applications |
| 3 relay contact closures (2 for constant pressure applications, four speed settings, 1 for start command) | |
| Diagnostics: | Low water pressure fault indicator |
| VFD fault indicator including motor overload faults | |
| Inlet and outlet glycerin filled gauges | |
| Hour meter showing system usage | |
| Discharge: | Variable pressure -or- constant pressure capability up to 1200 psi/ 83 bar |
| Drain: | Pressure release drain |
| Water Supply: | Supplied w/ 3/4” male NPT fitting, 3/4” ID hose |
| Filtration: | Dual filtration, scale inhibiting |
| Other: | Powder coated base |
| *signifies custom order |
Atacama Misting Pump Features
Ingenuity went into designing a product line suited to such high demand by remaining true to the concepts of maximum efficiency and engineered reliability. The optional programmable logic controller (PLC) and variable frequency drive (VFD) adjusts the motor speed and output based on pressure or zoning, in essence, managing fog output to defined parameters and operating energy and water efficient.
Due to the nature of high volume misting or fog, we’ve added a basic feature set that is tailored to commercial and industrial use. All Koolfog Atacama high-pressure fog pumps are equipped with a dual high volume water filtration system to clear water of debris or sediment that can potentially obstruct nozzles. In addition, each Atacama high pressure misting pump comes equipped with 4 service gauges – two glycerin filled inlet gauges that monitor both the incoming supply and actual water supply to the pump unit, one discharge gauge monitoring output pressure and an hour meter to provide hours of use for preventative maintenance scheduling. A regulator/unloader sets discharge pressure to bypass any unused flow while a pulsation dampener minimizes wear and tear on components. Also included is a safety relief valve to prevent over-pressure.
For more sophisticated applications such as special effects, humidification, or multi-zone control, an optional PLC offer variable pressure or constant pressure operation. Along with the safety mechanisms in place, the PLC control assures that creating robust mist and fog is not only possible but sustainable and controllable.
Inspiration for our Atacama Fog Pumps
Named after what’s considered the driest region in the world, the Atacama high pressure pump is equally impressive and suited to extreme environments. The Atacama Desert is a region of particular interest due to its soil composition which mirrors that of the planet Mars. The magnitude of dry heat for this area is evident by the 120,000 years of dry river beds. There have been weather stations located in the Atacama that have never felt a rain drop and there is evidence to suggest that no significant rain fell from 1570-1971. This desert holds the secret of future research for planetary missions, secrets of adaptability and the utter sublimity nature can provide. We chose to name our leader in industrial, commercial and humidification fog applications after these sentiments to offer ingenuity and high quality. We mimic the biological adaptability of the Atacama desert by the adaptability we’ve meticulously engineered into the Atacama high pressure misting and fog pumps.
Interested in the Atacama Standard Series?
Learn More Here
